Repairs to Clubhouse

Some behind the scenes stuff happening around the clubhouse that you'll appreciate while you're away..........


I had a stucco company out to repair the stucco on the soffits above the golf shop and pool rest room entrances.  When the buildings were built some 20+ years ago a metal corner bead was used to hold the stucco.  What happened was that water had gotten behind the stucco and rusted out the metal corner bead and the was causing the stucco to fall off.  The process was to rip off the old stucco and metal corner bead, install plastic corner bead, replace the stucco and paint.

The demo.  There's nothing subtle about this part, it's rip'n and tearing.

Here's the finished product.  If you look at the picture above, then look at this picture you might think "I can't even see what was done!" and that's the point.  The work that was performed was done so well, unless you were here to see it you'd never know.  If you look close in the picture above the two worker's heads you can see the last little bit of unpainted area on the side of the clubhouse.  I even had the workers repaint the entire affected area so there is absolutely no indication any work was done.

By the way, the pool cabana soffit was repaired in the same fashion.  You'd be hard to tell work was done.